INSTALLATION
Installation
www.stiebel-eltron.com CK 20 Trend | 7
ENGLISH
10.2 Appliance installation
D0000056454
1
1 Wall mounting bracket
f Hook the appliance with the upper vertical recesses of the
back panel onto the wall mounting bracket.
D0000056453
1
2
1 Through hole for locking screw
2 Locking screw
f Mark out the hole to be drilled for the locking screw. Use the
through hole in the lower section of the appliance casing as a
template for this purpose.
f Remove the appliance from the wall mounting bracket.
f Drill the hole for the locking screw. Insert a suitable rawl
plug.
f Hang the appliance as described on the wall mounting
bracket.
f Secure the appliance with a suitable screw.
10.3 Fitting the towel holder (accessory)
f Carefully pull the ends of the towel holder apart.
D0000059980
1
1 Towel holder mounts
f Insert the left and right-hand ends of the towel holder into
the mounts provided for this purpose at the back of the
appliance.
D0000059981
1
1 Towel holder, installed
!
CAUTION Injury
- Never hang any heat-sensitive or highly flammable
materials (e.g. textiles made of silk, wool or syn-
thetic fibre, paper) over the towel holder.
- Only heat/dry textiles that have been washed in
water (not dry cleaning).
To Next Page
Loading...
