STIEBEL ELTRON DEM 3 - Page 41

qqqĪZ`.<é<`VHCĪHB BÔĜ
ENGLISH
.CZ`<<`.HC
HBB.ZZ.HC.C&
DANGER Electrocution
The adjusting screw for setting the flow rate and the
potentiometer for setting the temperature are ‘live’ if the
appliance has not been isolated from the power supply.
26_02_05_0076_
f Remove the appliance cover.
Setting the maximum temperature
Factory setting: 38 °C
&
&
&
26_02_05_0077_
f Using a screwdriver, set the potentiometer to the required
maximum temperature.
f Fit the appliance cover.
Limiting the flow rate
Factory setting: Maximum flow rate