STIEBEL ELTRON DEM 3 - Page 48

ÔÄB qqqĪZ`.<é<`VHCĪHB
.CZ`<<`.HC
ZT.%.`.HC
  Bŗ BÔ Bō
Values
Max. feed temperature °C 60 60 60
Temperature setting range, DHW °C 30-50 30-50 30-50
ON l/min 1.5 1.8 2.2
Flow rate for pressure drop l/min 1.5 1.8 2.2
Pressure drop at flow rate MPa 0.05 0.06 0.07
Flow rate limit at l/min 2.3 2.7 3.5
DHW delivery l/min 2.0 2.5 3.3
Delta T if presented K 25 25 25
Hydraulic data
Rated capacity l 0.1 0.1 0.1
Versions
Oversink installation X X X
Undersink installation X X X
Open vented type X X X
Sealed unvented type X X X
IP-Rating IP25 IP25 IP25
Protection class 1 1 1
Insulation block Plastic Plastic Plastic
Heating system Bare wire Bare wire Bare wire
Cap and back panel Plastic Plastic Plastic
Colour white white white
Dimensions
Height/width/depth mm 143/190/82 143/190/82 143/190/82
Weights
Weight kg 1.5 1.5 1.5