17
3. Guarantee
For guarantees please refer to the
respective terms and conditions of
supply for your country.
The installation, electrical
connection and first operation
of this appliance should be carried
out by a qualified installer.
The company does not
accept liability for any failure
caused by improper installation and /
or unauthorized installers.
Fault Cause Rectification
No hot water despite water flow
through the unit.
- The water flow volume
required for the unit
to turn it on has not
been reached.
- Increase flow volume
- Water flow too high Reduce water flow
- Water flow too high
- Heating setting too low
- Turn knob to the right
(max. position)
- ELCB activated. - Turn ELCB Reset
konb.
4. Fault elimination for the user
To Next Page
Loading...
