STIEBEL ELTRON DHC 8 EL - Page 4

Description of the unit (External)
Operation Instruction for the user and the qualied installer
1. Operation and installation
instruction
1.1 Description of the unit.
The DHC 8 EL fully electronic instanta -
neous water heater heat the water while it
is owing through the unit. The indicator
light will show when the heater is in opera-
tion, and the temperature can be adjusted
by turning the knob at the front of the unit,
which controls the operation of the heater
electronically.
1.2 Using the unit
1. Adjust the temperature using at
the selector.
Level
heats the water to a
temperature of~ 40
C
Level
heats the water to a
medium temperature
of ~ 50
C
Level
heats the water to a
maximum temperature
of ~ 60 C
Note : Incase incoming water ow is
too high or cold water
temperatures are too low
temperatures may not be reached.
2. Turn the hot water on. The indicator
light will show at the front of the unit (a).
Fig 1
STIEBEL ELTRON
4
1.3 Description of the unit (External)
a. Indicator Light d. Cold Water Inlet Pipe
b. Temperature Control knob
c. Hot Water Outlet Pipe