2 | DHC-E www.stiebel-eltron-usa.com
CONTENTS | OPERATION
OPERATION
1. General information _________________________________________2
1.1 Safety information _______________________________________________ 2
1.2 Other symbols in this document ______________________________ 3
2. Safety __________________________________________________________3
2.1 Intended use ______________________________________________________ 3
2.2 General Information_____________________________________________ 3
2.3 Safety Precautions _______________________________________________ 3
2.4 Test symbols ______________________________________________________ 3
3. Register your product _______________________________________4
4. General ________________________________________________________4
5. Troubleshooting ______________________________________________4
INSTALLATION
6. Mounting the appliance _____________________________________5
6.1 Application ________________________________________________________ 5
6.2 Mounting __________________________________________________________ 5
7. Water connections ___________________________________________6
8. Electrical connection _________________________________________6
8.1 DHC-E 8/10 - Appliance with output power options ______ 6
8.2 DHC-E 11 L _________________________________________________________ 7
8.3 Temperature setting/anti-scalding protection _____________ 7
8.4 Terminal block ____________________________________________________ 7
9. Commissioning _______________________________________________7
9.1 Appliance handover _____________________________________________ 7
10. Troubleshooting ______________________________________________7
10.1 Diagnostic lights _________________________________________________ 7
10.2 Fault table _________________________________________________________ 7
10.3 Resetting the safety thermal cutout _________________________ 8
11. Normal maintenance _________________________________________8
12. Technical Data ________________________________________________8
12.1 Dimensions diagram ____________________________________________ 8
12.2 Wiring diagram __________________________________________________ 9
12.3 Maximum temperature increase above ambient water
temperature _____________________________________________________ 10
12.4 Data table ________________________________________________________ 11
13. Spare parts _________________________________________________ 12
14. Warranty ____________________________________________________ 13
OPERATION
1. General information
Note
Read these instructions carefully before using the ap-
pliance and familiarize yourself with its functions. Keep
these instructions safe. Pass on the instructions to a new
user if required.
1.1 Safety information
1.1.1 Structure of safety information
KEYWORD: Type of risk
Here, possible consequences are listed that may
result from not observing the safety information.
f Steps to prevent the risk are listed.
1.1.2 Symbols. type of risk
Symbol Type of risk
!
Injury
Electrocution
Burns or scalding
1.1.3 Keywords
KEYWORD Description
DANGER If this information is not observed, it will result in serious
injury or death.
WARNING If this information is not observed, it can result in serious
injury or death.
CAUTION If this information is not observed, it can lead to medium
or minor injury.