STIEBEL ELTRON IS 35 E - Installing the Unit

STIEBEL ELTRON
8
1.2 Installing the unit
Switch off main breaker
for water heater.
- Determine the position of the
drill holes by installation template
and drill the holes(Fig 3).
- Release cover securing screw.
- Open and remove cover.
- Feed the connection cable seal in
the rear wall.
- Guide the unit along the wall and
lock screw in fixing hole by sliding
downwards.
1. Installation Instruction for the qualied installer
Fig 7
Fig 8
Fig 9
Fig 10