EasyManua.ls Logo

STIEBEL ELTRON PEO 18/21/24 User Manual

STIEBEL ELTRON PEO 18/21/24
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATION AND INSTALLATION
OPERACIÓN E INSTALACIÓN
OBSLUHA A INSTALACE
OBSŁUGA I INSTALACJA
РАКУВАЊЕ И ИНСТАЛАЦИЈА
ЭКСПЛУАТАЦИЯ И УСТАНОВКА
Electronically controlled comfort instantaneous water heater | Calentador instantáneo de confort
con regulación electrónica | Elektronicky regulovaný komfortní průtokový ohřívač| Elektronicznie
regulowany komfortowy przepływowy ogrzewacz wody | Електронски регулиран удобен проточен
бојлер | Проточный водонагреватель повышенной комфортности с электронной системой
регулирования
» PEO 18/21/24
» PEO 27
Made in Germany

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the STIEBEL ELTRON PEO 18/21/24 and is the answer not in the manual?

STIEBEL ELTRON PEO 18/21/24 Specifications

General IconGeneral
TypeInstantaneous water heater
Power Output18/21/24 kW
Voltage400 V
Temperature AdjustmentElectronic
InstallationWall-mounted
IP RatingIP25
Frequency50/60 Hz
Energy Efficiency ClassA
Dimensions478 x 225 x 105 mm
Maximum Operating Pressure10 bar
Maximum Water Temperature60 °C
Phase3
Water ConnectionG 1/2"
Flow Rate at ΔT 30 K7.3/8.4/9.7 l/min

Summary

Operation

Safety instructions

Guidelines and symbols for safe appliance operation.

Installation

Safety

Critical safety measures required during installation.

General safety instructions

General safety advice for qualified contractors during installation.

Standard installation

Step-by-step guide for standard appliance installation procedures.

Making the electrical connection

Instructions for safely connecting the appliance to the electrical supply.

Electrical connection from below on unfinished walls

Specifics for electrical connection from below on unfinished walls.

Electrical connection on finished walls

Procedures for electrical connection on finished wall surfaces.

Commissioning

Procedures for starting up and testing the installed appliance.

Initial start-up

Detailed steps for the first time the appliance is powered on.

Appliance shutdown

Instructions for properly turning off and disconnecting the appliance.

Troubleshooting

Detailed guide for diagnosing and fixing operational faults.

Maintenance

Procedures for regular maintenance of the appliance.

Wiring diagram

Electrical schematic illustrating the appliance's wiring.

Fault conditions

Description of potential fault conditions and their causes.

Data table

Comprehensive table of technical data and specifications.

Related product manuals