To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON PEY 18/21/24 and is the answer not in the manual?
General| Power Output | 18/21/24 kW |
|---|---|
| Voltage | 400 V |
| Installation | Wall-mounted |
| Control | Electronic |
| Temperature Adjustment | 30-60 °C |
| Protection Class | IP25 |
| Type | Instantaneous water heater |
| Phases | 3/PE |
| Frequency | 50/60 Hz |
| Nominal Current | 26/30/35 A |
| Wire Size | 4 mm² |
| Operating Pressure | 10 bar |
| Water Connection | G 1/2" |
Details safety instructions, including structure of warnings, risk types, and keywords.
Provides crucial safety advice regarding high temperatures and potential scalding risks during operation.
Emphasizes using original accessories and spare parts for reliable operation and function.
Instructs to install the appliance in a frost-free room near the draw-off point and ensure wall load capacity.
Covers safety valves, flushing lines, flow rate for switching on, and permissible water line materials.
Details electrical connection from above, water connection on unfinished walls, and preset medium connected load.
Explains how to adjust the appliance's temperature limit, especially when using preheated water.
Guides users through identifying and resolving common faults using diagnostic traffic light indicators.
Illustrates the internal electrical connections and components of the appliance.
