To Next PageTo Next PageWhat to do if my STIEBEL ELTRON SNU 10 SLi does not supply hot water?
If your STIEBEL ELTRON Water Heater isn't providing hot water, there could be a couple of reasons. First, check if the temperature selector is set to “°C”. If it is, switch the appliance ON by turning the temperature selector. Also, the thermostop function (thermal separation) might be preventing the tap from becoming hot in standby mode.
Why does water only come out at a reduced rate from my STIEBEL ELTRON SNU 10 SLi Water Heater?
If water is coming out of your STIEBEL ELTRON Water Heater at a reduced rate, the aerator in the tap might be scaled up. Descale or replace the aerator to solve this issue.
How to fix loud boiling noises inside STIEBEL ELTRON SNU 10 SLi?
Loud boiling noises inside your STIEBEL ELTRON Water Heater usually indicate that the appliance is scaled up. Have the appliance descaled by a qualified contractor.
How to fix reduced water flow from my STIEBEL ELTRON Water Heater?
If water can only be drawn at a reduced rate from your STIEBEL ELTRON Water Heater, the aerator in the tap might be scaled up. Descale or replace the aerator to fix this.
What to do if there is no power at my STIEBEL ELTRON SNU 10 SLi?
If your STIEBEL ELTRON Water Heater has no power, check the plug and the fuses/MCBs in the fuse box/distribution panel.
Why does my STIEBEL ELTRON SNU 10 SLi make loud boiling noises?
If you're experiencing loud boiling noises inside your STIEBEL ELTRON Water Heater, it's likely scaled up. To resolve this, have the appliance descaled by a qualified contractor.
General| Brand | STIEBEL ELTRON |
|---|---|
| Model | SNU 10 SLi |
| Category | Water Heater |
| Language | English |
