Do you have a question about the STIEBEL ELTRON SNE 5 t ECO and is the answer not in the manual?
Temperature range | 35-85 °C |
---|---|
Energy efficiency class | A |
Rated voltage | 230 V |
Frequency | 50/60 Hz |
IP rating | IP24 |
Protection Class | I |
Type | Tankless Water Heater |
Rated capacity | 5 l |
Connection | G 1/2" |
Overview of manual's intended audience and purpose for users and contractors.
Details the structure and symbols used for safety instructions.
Specifies that measurements are given in mm unless otherwise stated.
Defines the appliance's purpose for heating domestic hot water.
Provides warnings about burns, injury, and general appliance safety.
Details the open vented appliance, thermostop, anti-drip, and ECO mode functions.
Overview of the appliance's control panel, its components, and the user interface.
Explains the meaning of different LED illuminations and flashes.
Instructions on how to lock and unlock the appliance's programming keys.
Describes the standard display, standard menu, and configuration menu.
Lists the actual operating values that can be displayed on the appliance.
Explains the three available time programs (Pro1, Pro2, Pro3) and their settings.
Details the available parameters (P1-P5) for appliance settings and temperature limits.
Provides instructions on cleaning the appliance and necessary maintenance.
Lists common problems, their causes, and remedies.
Emphasizes that only qualified contractors should perform installation and maintenance.
Advises to observe all applicable national and regional regulations.
Describes the open vented appliance and lists required/additional accessories.
Instructions for preparing the water line and selecting a suitable installation site.
Details steps for mounting the appliance and making water and electrical connections.
Procedures for initial start-up, appliance handover, and recommissioning.
Instructions for safely shutting down and draining the appliance.
Lists common installation-related problems, their causes, and remedies.
Details on draining, cleaning strainers, opening the unit, descaling, and checks.
Provides technical specifications, dimensions, connections, and wiring diagrams.
Illustrates heat-up times and provides a comprehensive data table of specifications.
Information on country-specific approvals and energy consumption data.