70
a30
a20
i13
14
D0000051569
SNU 10 SLi AUS
a10 Appliance Height mm 503
a20 Appliance Width mm 295
a30 Appliance Depth mm 275
c01 Cold water inlet Male thread G 3/8 A
c06 DHW outlet Male thread G 3/8 A
i13 Wall mounting bracket
Height mm 363
Horizontal hole spacing mm 200
15.2 Wiring diagram
1/N/PE ~ 220 - 240V
LN
85�02�06�0001
15.3 Heat-up diagram
The heat-up period depends on the degree of scaling and residual
heat. For the heat-up time for a cold water supply at 10 °C and a
maximum temperature setting, see the diagram.
35 40 45 50 55 60 65 70 75 80 85
0
5
10
15
20
25
D0000047118
x Temperature in °C
y Duration in min
Example:
Temperature setting: 65°C
Heat-up time approx. 18 min
15.4 Country-specific approvals and certifications
The test symbols can be seen on the type plate.
15.5 Extreme operating and fault conditions
In the case of faults, a peak temperature of up to 100 °C may briefly
occur in the system.
15.6 Details on energy consumption
Product data complies with EU regulations relating to the Directive
on the ecodesign of energy related products (ErP).
SNU 10
SLi
SNU 10 SL
GB
SNU 10
SLi AUS
222199 222198 229468
Manufacturer STIEBEL
ELTRON
STIEBEL
ELTRON
STIEBEL
ELTRON
Load profile XXS XXS XXS
Energy efficiency class A A A
Energy conversion efficiency % 37 37 37
Annual power consumption kWh 500 500 500
Default temperature setting °C 55 55 55
Sound power level dB(A) 15 15 15
Daily power consumption kWh 2,328 2,328 2,328
To Next Page
Loading...
