J
Jessica JonesAug 3, 2025
What to do if my STIEBEL ELTRON Boiler has no power?
- NnormanpenningtonAug 3, 2025
If your STIEBEL ELTRON Boiler has no power, check the plug and the fuses or MCBs in the fuse box.
To Next PageTo Next PageWhat to do if my STIEBEL ELTRON Boiler has no power?
If your STIEBEL ELTRON Boiler has no power, check the plug and the fuses or MCBs in the fuse box.
How to turn on STIEBEL ELTRON Boiler if it doesn't supply hot water?
If your STIEBEL ELTRON Boiler does not supply hot water, switch the appliance on by turning the temperature selector.
Why is my STIEBEL ELTRON Boiler making loud boiling noises?
If your STIEBEL ELTRON Boiler is making loud boiling noises, it's likely scaled up. Have the appliance descaled by a qualified contractor.
What to do if water can only be drawn at a reduced rate from STIEBEL ELTRON Boiler?
If water can only be drawn at a reduced rate from your STIEBEL ELTRON Boiler, the aerator in the tap is likely scaled up. Descale or replace the aerator.
Why does water drip from the tap outlet of my STIEBEL ELTRON Boiler?
If water drips from the tap outlet of your STIEBEL ELTRON Boiler during the heat-up process, it could be due to frequent minimal draw-off amounts (less than 0.4 l/min). Try changing your draw-off pattern to amounts greater than 0.4 l/min.
General| Capacity | 5 liters |
|---|---|
| Power | 2 kW |
| Voltage | 230 V |
| Installation | Undersink |
| Temperature Range | 35-85 °C |
| Energy Efficiency Class | A |
| Maximum operating pressure | 0.6 MPa |
| Protection rating | IP24 |
| Type | Undersink water heater |
| Weight | 3.2 kg |
| Connection | 1/2" |
| Power supply | Single-phase |
