OPERATION
Appliance description
6 |WPF | WPF cool www.stiebel-eltron.com
3.2 Accessories
3.2.1 FE7 remote control
PIC00000609
The FE7 remote control allows you to:
- Change the set room temperature for heating in heating cir-
cuit1 or2 by ±5°C.
- Change the operating mode.
The FE7 remote control features the following controls:
- Rotary selector for changing the set room temperature
- Rotary selector with the following positions
-
Automatic mode
-
Constant setback mode
-
Constant day mode
Note
The remote control is only active in the automatic mode
of the heat pump manager.
You can set the temperature for heating times in auto-
matic mode at the remote control.
3.2.2 FEK remote control
PIC00000704
The FEK remote control allows you to:
- Change the set room temperature for heating in heating cir-
cuit1 or2 by ±5°C.
- Change the operating mode.
The FEK features the following controls:
- Rotary selector for changing the set room temperature
- „Away“ button
- „Info“ button
- Button for selecting the following operating modes:
-
Standby mode
-
Automatic mode
-
Constant day mode
-
Constant setback mode
Note
If the FEK is preselected for a specific heating circuit,
the heating curve, room temperature and heating pro-
gram parameters are not shown at the WPM3i heat pump
manager.
3.2.3 Internet Service Gateway (ISG)
PIC00001002
The Internet Service Gateway (ISG) is an Ethernet gateway in a
wall mounted casing and is connected into the LAN (local area
network).
It enables the convenient operation, adjustment and checking of
heat pump system data via the browser of a computer, laptop or
tablet in the local home network.
If required by the customer, appliance data can be automatically
transmitted to the appliance manufacturer‘s SERVICEWELT portal
via the internet.
Via SERVICES you can access additional options such as system
operation on the go with a smartphone as well as remote setting
of parameters and remote diagnosis, etc.
You can find the current services on our homepage.
To Next Page
Loading...
Need help?
General
