STIEBEL ELTRON WPL-A 05 HK 230 Premium - Page 11

INSTALLATION
Preparation
www.stiebel-eltron.com WPL-A Premium | 11
Installation on foundations
4
12
5
AB
C
3
D0000028297
A 100
B 300
C Depth of frost line
1 Heating flow
2 Heating return
3 Condensate drain conduit
4 Foundation
5 Gravel bed
Note
To secure the appliance against toppling over, it can also
be fixed to the foundations with screws.
f Use the accessories with which the appliance was
secured to the transport pallet.
D0000064201
f Hook two brackets respectively into the lateral slots on the
front and back. Ensure you are using the correct brackets for
the left and right hand slots respectively.
f Position the brackets so that the groove on the bracket is
hooked into the appliance.
f Secure the appliance to the foundations using the brackets
and suitable rawl plugs and screws. Do not use the screws
with which the appliance was secured to the transport pallet.
MK1 mounting bracket
Note
The mounting bracket cannot be used in combination
with the connection sets (AS-WP1 and AS-WP2).
7
6
1
A
8
3
1
2
4
5
B
D0000060818
A Depth of frost line
B 245
1 Heating flow
2 Heating return
3 Conduit for supply line
4 Foundation
5 Mounting bracket
6 Gravel bed
7 Condensate drain conduit
8 Condensate drain