Stiga 320 - Page 18

[1]
Type
[2]
Model
[3]
Engine
[A]
(with petrol pump)
[4]
Engine displacement
[5]
Traction
[6]
Power
[7]
Engine revs
[8]
Electrical System
[9]
Battery
[10]
Fuel
[A]
Unleaded petrol
[11]
Fuel tank capacity
[12]
Engine oil
[13]
Engine oil, service category
[A]
SJ or higher
[14]
Engine oil tank capacity
[15]
Transmission uid
[16]
Quantity of transmission uid required for uid
change
[17]
Spark plug
[A]
Champion XC12YC or equivalent
[18]
Spark gap
[19]
Tyres
[20]
Spark gap
[21]
Tyres
[22]
Tyre pressure
front
rear
[23]
Cutting height
[A]
For the cutting height, please refer to the "Technical
Data Table" in the cutting device assy manual.
[24]
Forward travel speed (indicative)
[25]
Reverse travel speed (indicative)
[26]
Weight
[27]
A = Length
[28]
B = Pitch
[29]
C = Height
[30]
D = Width
[31]
Measured sound power level
[32]
Uncertainty
[33]
Guaranteed sound power level
[34]
Sound pressure level
[35]
Uncertainty
[36]
Vibration value in the driver's seat
[37]
Uncertainty
[38]
Vibration value in the steering wheel
[39]
Uncertainty
[40]
Cutting height electric adjustment
[41]
ACCESSORIES AVAILABLE ON REQUEST
[42]
Description
[43]
Trailer
[44]
Fertilizer spreader
[45]
Grass and leaf collector
[46]
Snow chains
[47]
Mud / Snow wheels
[48]
Cutting device assy
[49]
Front harrow
[50]
Snow thrower
[51]
Front sweeper
[52]
Blade type snow plough
[53]
Rear wheel counterweights
[54]
(**) Counterweights must be installed on the rear
wheels
[55]
TABLE FOR CORRECT ACCESSORY COMBINA-
TIONS
[56]
REAR ACCESSORIES
[57]
FRONT ACCESSORIES
[58]
Accessory
[59]
(***) For P 901 C W models, when the cutting
device assies (type 110C E, 110C E QF, 125C E
QF) are installed at the same time as the trailer,
counterweights must be installed on the rear wheels.
0 TECHNICAL DATA TABLE
EN
ENGLISH
(Translation of the Original Instructions)
XVI