Stiga 85C QF User Manual

EN - 4
3.1.2 Improper use
Any other use, dierent to the uses cited
above, may be dangerous and cause injury
and/or material damage. Improper uses (by
way of example and not limited to) are:
• carrying people, children or
animals on the machine;
• pushing loads;
• activation of the cutting devices
on grass-free areas.
Improper use will render the warranty
null and void and the Manufacturer shall
be exonerated from all liability, with all
responsibility for damages or injuries to self
or third parties being transferred to the user.
3.1.3 
This machine is designed for use by
the general public, i.e. non-professional
operators. It is intended for “hobby use”.
IMPORTANT The machine must
be used by one operator.
3.2 WARNING SIGNS
There are various symbols on the machine
(g. 3). They are designed to remind the
operator of the precautions which need
to be taken to safely use the machine.
What the symbols mean:
CAUTION!!! Read the instruction
manual before using the machine.
CAUTION!!! Watch out for any
loose objects on the ground. Pay
attention to any other people
who may be in the area.
WARNING! Before performing any
repair operations, disconnect the
spark plug lead from the spark plug.
CAUTION!!! Never put your hands
or feet under the safeguard when
the machine is in operation.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised assistance centre.
3.3 
The identication label holds
the following data (g. 1):
1. Trade mark
2. Manufacturer's address
3. Model
4. Type of machine
5. Denition of the accessory
6. Weight in Kg
7. Year of manufacture
8. Serial number
9. Article code
10. CE conformity marking
Transcribe the machine identication
data in the space provided on the
label found in the back cover.
IMPORTANT Use the identication
data written on the product identication
label whenever you contact an
authorized service centre.
IMPORTANT The example of the
declaration of conformity can be found
on the last pages of this manual.
3.4 MAIN COMPONENTS
The machine is made up of the
following main components (g. 1):
A. Arms
 Safeguard
C. Wheels
D. Grip point for manual lifting
E. “Quick Flip” knob
F. Cutting means drive belt
G. Cutting height indicator
H. Manual cutting height adjustment (if present)
I. Electric cable connector (if present)
J. Cutting means


K. Quick-release supports
L. Lifting pulley
M. Accessory lift pedal
N. Cutting height electric adjustment switch
O. Power socket (if present)

Stiga 85C QF Specifications

General

Brand	Stiga
Model	85C QF
Category	Lawn Mower Accessories
Language	English