EN
USING THE MACHINE / MAINTENANCE AND STORAGE
WARNING!
For your safety and that of
others:
– Correct maintenance is essential to main-
tain the original eciency and safety of the
machine over time.
– Keep all nuts, bolts and screws tight to be
sure the equipment is in safe working con-
dition.
– Never use the machine with worn or dam-
aged parts. Damaged parts are to be re-
placed and never repaired.
– Only use original spare parts. Parts that are
not of the same quality can seriously dam-
age the equipment and compromise safety.
WARNING!
During maintenance oper-
ations:
– Remove the spark plug cap.
– Wait until the engine is suciently cold.
– Use protective gloves when handling the
bar and chain.
– Keep the bar protection devices on, except
when intervening directly on the bar or the
chain.
– Never dispose of oils, fuel or other polluting
materials in unauthorised places.
CYLINDER AND SILENCER (Fig. 19)
STARTING SYSTEM
CLUTCH UNIT (Fig. 20)
CHAIN BRAKE
-
CHAIN SPROCKET
-
LUBRICATION HOLE (Fig. 21)
8. MAINTENANCE AND STORAGE
-
-
WARNING!
Allow the engine to cool
be f ore storing in any enclosure.
To reduce re hazards, clean the machine
thoroughly to get rid of any sawdust, bran-
ches, leaves or excess grease, never leave
containers with the cut debris inside the stor-
age area.
To Next Page
Loading...
