Stiga C 41 T User Manual


-
        

• Maintain a rm grip, with thumbs and ngers en-
circling the chain saw handles, with both hands on
the saw and position your body and arm to allow
you to resist kickback forces.


• Do not overreach and do not cut above shoulder
height.


• Only use replacement bars and chains specied
by the manufacturer.

• Follow the manufacturer’s sharpening and main-
tenance instructions for the saw chain.

H) CHAIN-SAW OPERATING TECHNIQUES



J) RECOMMENDATION FOR THE FIRST-TIME
USERS

 

 

 


K) HOW TO READ THE MANUAL
-


NOTE
or
IMPORTANT
These give details or further in-
formation on what has already been indicated, and aim to
prevent both damage to the machine, and the machine
from causing damage.
WARNING!
Non-observance will re sult in
the risk of injury to oneself or others.
DANGER!
Non-observance will re sult in
the risk of serious injury or death to oneself or
others.
F) RESIDUAL RISKS
• Keep all parts of the body away from the saw chain
when the chain saw is operating. Before you start
the chain saw, make sure the saw chain is not
contacting anything.  


• Always hold the chain saw with your right hand
on the rear handle and your left hand on the front
handle.


• Wear safety glasses and hearing protection. Fur-
ther protective equipment for head, hands, legs
and feet is recommended.  


• Do not operate a chain saw in a tree.


• Always keep proper footing and operate the chain
saw only when standing on xed, secure and level
surface.

• When cutting a limb that is under tension be alert
for spring back.


• Use extreme caution when cutting brush and sap-
lings.

• Carry the chain saw by the front handle with the
chain saw switched o and away from your body.
When transporting or storing the chain saw always
t the guide bar cover.


• Follow instructions for lubricating, chain ten-
sioning and changing accessories.-


• Keep handles dry, clean, and free from oil and
grease.

• This machine’s starter u nit generates an average
sized electromagnetic eld,     
       

-

       

G) CAUSES AND OPERATOR PREVENTION
OF KICKBACK:
     











      
 SAFETY REQUIREMENTS
EN

Stiga C 41 T Specifications

General

Brand	Stiga
Model	C 41 T
Category	Chainsaw
Language	English