• M
achines with standard chain tension
adjuster
-
•
Machines with quick chain tension
adjuster
(SP 375Q, SP 405Q, C 38 T, C 41 T)
6. CHECKING THE CHAIN BRAKE
-
-
–
–
– -
–
WARNING!
Do not use the machine if
the chain brake does not function correctly
and have it inspected by your dealer.
WARNING!
Always close the fuel tank
cap rmly.
WARNING!
Immediately clean all tra-
ces of fuel which may have dripped on the
machine or the ground and do not start the
engine until the petrol fumes have dissipated.
3. CHAIN LUBRICANT
IMPORTANT
Only use special oil for chain
saws or adhesive oil for chain saws. Do not use oil
containing impurities so as not to block the oil lter
and to prevent irreparable damage to the oil pump.
IMPORTANT
The special oil for lubricating
the chain is biodegradable. Use of a mineral oil or
engine oil causes serious damage to the environ-
ment.
-
4. CHECKING THE MACHINE
5. CHECKING THE CHAIN TENSION
WARNING!
Perform all operations
with the engine o.
PREPARING TO WORK
EN
To Next Page
Loading...
Need help?
General
