4
-
Directive 2012/19/EU on electrical and electronic
-
-
service.
DESCRIPTION OF SYMBOLS
ON CONTROLS (where applicable)
20. -
21. Stop
22. Run
SAFETY REQUIREMENTS
-
-
61.
62.
63.
-
-
aged. Do not put hands or feet near or under the open-
64. -
65.
66.
67.
OPERATING INSTRUCTIONS
NOTE – The number which precedes each paragraph
-
1. COMPLETING ASSEMBLY
NOTE The machine can be supplied with some parts
WARNING! Unpacking and completing the assem-
bly should be done on a flat and stable surface, with
enough space for moving the machine and its packag-
ing, always making use of suitable equipment.
Disposal of the packaging should be done in accord-
ance with the local regulations in force.
1.1a Assembling the handle
(Type“I” - Model 340)
-
-
Fasten the cable (16) to the cable fasteners (17) and (18)
1.1b Assembling the handle
(Type“Il” - Model 340)
Fasten the cable (16) to the cable fasteners (17) and (18)
1.1c Assembling the handle
(Type“Ill” - Model 380 - 420)
-
-
-
-
Fasten the cable (16) to the cable fasteners (17) and (18)
1.1d Assembling the handle
(Type“IV” - Model 380 - 420)
-
-
To Next Page
Loading...
