Edition Manual Product Page
2008-03-18 Workshop Manual, Stiga Primo 6 Mower Decks 12
Checks
When all parts are disassembled, check the
following items.
All defective parts shall be replaced
Item Check instruction
Bearing
noise
Rotate the shafts in the bearing
boxes and listen for abnormal
noise and feel if any uneven
resistance exists.
If any abnormal noise is heard or
if any uneven resistance exists
shall the bearing box be replaced.
Bearing
play
Force the shafts radially. No radial
play shell exist
Bearing
sealings
Check visually the bearing
sealings. All sealings shall be
intact.
Belts Bend the belts in all directions. No
cracks shall be visible.
Blades The blades shall be sharp. No
cracks are allowed.
Casing The casings shall be intact and
not show up errors any cracks.
Pulleys Check that the arrows coincide at
the timing belt pulleys. See
previous in this chapter.
Painting When the surfaces are completely
dry and clean, touch up the
paintwork. Use durable paint
intended for metal outdoors.
To Next Page