Stiga SBK 35 D - Troubleshooting; Technical Specifications

14 TROUBLESHOOTING / TECHNICAL SPECIFICATIONS
EN
9. TROUBLESHOOTING
1) The engine will
not start or will not
keep running
2) The engine starts
but is lacking in
power
3) The engine runs
irregularly and lacks
in power when
revved
4) The engine gives
off an excessive
amount of smoke
– Incorrect starting procedure
– Dirty spark plug or incorrect
distance between the electrodes
– Air filter clogged
– Carburetion problems
– Air filter clogged
– Carburetion problems
– Dirty spark plug or incorrect
distance between the electrodes
– Carburetion problems
– Incorrect composition
of the fuel mixture
– Carburetion problems
– Follow the instructions
(see chapter 6)
– Check the spark plug
(see chapter 8)
– Clean and/or replace the filter
(see chapter 8)
– Contact your dealer
– Clean and/or replace the filter
(see chapter 8)
– Contact your dealer
– Check the spark plug
(see chapter 8)
– Contact your dealer
– Prepare the fuel mixture according
to the instructions (see chap. 5)
– Contact your dealer
PROBLEM LIKELY CAUSE SOLUTION
10. TECHNICAL SPECIFICATIONS
Spark plug: NGK-R BPMR7A
Mixture: Petrol : 2-stroke oil = 50:1 = 2%
Maximum permitted blade diameter: 3 or 4 point blade = Ø 255 mm
1)
Weight as per standard ISO 11806-1 (without fuel, cutting devices and harness)
MODEL
Engine 2-stroke air-cooled
BKE 27 BKE 27D BKE 35 BKE 35D BKE 45
Weight
1)
kg 6 6.7 6.6 7.3 7.3
Capacity / Power
cm
3
/kW
26.3/0.77 26.3/0.77 34.4/1.03 34.4/1.03 45.4/1.42
Engine rotation speed at tick-over min
-1
3000 3000 3000 3000 3000
Maximum engine rotation speed min
-1
11000 11000 11000 11000 10800
Maximum tool rotation speed min
-1
8500 8500 8550 8550 8300
Tank capacity
cm
3
500 500 700 700 900