EN - 7
5
6
7
for models
with rear collection only)
8
-
(for
rear collection models only)
Side discharge chute (for models with
side discharge only)
10
for side discharge
models only, if foreseen).
11 Envelope containing:
(for models with side discharge only)
cables
- 1 spare 10 A fuse
4.1.1 Unpacking
1.
2.
box, including these instructions.
3.
4.
the rear drive release lever to the
(par. 5.13).
4.2
1.
2. Mount the hub ( on the shaft
(
3. Fit the dashboard cover (
the seven fasteners into place.
4. onto
the hub (
5a. For type "l" steering wheel only
- Fit the spacer () and fasten the
supplied ( in the indicated order.
5b. For type "ll" steering wheel only - Fasten
( supplied, in the indicated order.
6.
4.3
4.4 MOUNTING AND CONNECTING
1. to
2.
IMPORTANT Always fully charge the battery
according to the instructions in the battery book-
let.
IMPORTANT To prevent the safety device in
the electronic circuit board from cutting in, never
start the engine until the battery is fully charged!
4.5 MOUNTING THE REAR BUMPER
1.
1a. For type "l" bumpers only - Mount the front
1b. For type “II” bumpers only
1. and
6.B)
2. .
3.
(
( (
4.6 SIDE DISCHARGE CHUTE
1.
hole and turning it so that both the spring
To Next Page
Loading...
Need help?
General
