EasyManua.ls Logo

Stiga stig User Manual

Stiga stig
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Stiga stig and is the answer not in the manual?

Stiga stig Specifications

General IconGeneral
BrandStiga
Modelstig
CategoryLawn Mower
LanguageEnglish

Summary

SAFETY

1.1. SAFETY INFORMATION

General safety and health information for users, emphasizing risk prevention.

1.2. SAFETY INSTRUCTIONS

Detailed instructions and obligations for safe operation, maintenance, and storage.

1.2.1. SAFE OPERATING PROCEDURES

Procedures for safe operation, including training, preparation, and general information.

1.2.2. OPERATION

General information and maintenance/storage procedures for safe operation.

1.3. STOPPING AND TURNING OFF THE ROBOT LAWN MOWER IN SAFE CONDITIONS

Procedure for safely stopping and switching off the robot lawn mower.

1.4. TECHNICAL DATA - STIGA STIG

Specifications and technical data for the STIGA STIG robot lawn mower.

INTRODUCTION

2.1. GENERAL INTRODUCTION

Purpose of the manual and how to read it, including symbol explanations.

2.1.1. PURPOSE OF THE MANUAL

Explains the manual's purpose and the importance of reading it for safety.

2.1.2. INSTRUCTIONS FOR READING FROM SMARTPHONE

Guidance on optimal smartphone orientation for manual readability.

2.2. PRODUCT OVERVIEW

General description of the robot lawn mower and its purpose.

2.2.1. GENERAL DESCRIPTION

Describes the robot lawn mower's design, autonomous cutting, and programming.

2.2.2. MAIN COMPONENTS

Lists and illustrates the main components included in basic and optional kits.

2.3. UNPACKING

Step-by-step procedure for unpacking the robot lawn mower and its accessories.

2.4. SYMBOLS AND NAMEPLATES

Explains various warning, ban, and information symbols on the machine.

2.5. GENERAL MANUAL READING INSTRUCTIONS

Outlines the criteria and structure used for preparing the manual.

INSTALLATION

3.1. GENERAL INSTALLATION INFORMATION

General caution regarding safety devices during installation.

3.2. INSTALLATION COMPONENTS

Lists and illustrates all components required for installation.

3.3. VERIFICATION OF THE INSTALLATION REQUIREMENTS

Procedures to check garden suitability and installation requirements.

3.3.1. GARDEN VERIFICATION

Checks for lawn uniformity, obstacles, and initial grass height.

3.3.2. CHECKS FOR THE INSTALLATION OF THE CHARGING BASE AND POWER SUPPLY

Electrical hazards and checks for charging base and power supply installation.

3.3.3. MAIN VERIFICATIONS FOR THE INSTALLATION OF THE PERIMETER CABLE

Verifications for perimeter cable installation, focusing on slopes.

3.4. CRITERIA FOR INSTALLING THE PERIMETER CABLE

Guidelines for placing the perimeter cable around various garden elements.

3.4.1. PERIMETER CABLE PLACEMENT

Procedures for placing perimeter cable near pavements, flower beds, and obstacles.

3.4.2. DELIMITATION OF OBSTACLES

Procedures for delimiting obstacles using the perimeter wire.

3.4.3. PASSAGES AMONG DIFFERENT AREAS OF THE GARDEN

Rules for creating passages between different garden areas with perimeter wire.

3.5. COMPONENTS INSTALLATION

General instructions and electrical hazards related to component installation.

3.5.1. INSTALLATION OF THE PERIMETER CABLE

Step-by-step guide for installing the perimeter cable using pegs.

3.5.2. JUNCTION OF THE PERIMETER CABLE

Procedure for making junctions in the perimeter cable.

3.5.3. CHARGING BASE INSTALLATION

Instructions for installing the charging base, including placement options.

PRODUCT SETTINGS

3.7.1. PRELOGIN

Initial app access for information, registration, or login.

3.7.2. SIGN UP

User registration process through the STIGA STIG app.

3.7.3. PAIRING

Procedure for pairing the mobile device with the robot lawn mower via Bluetooth.

3.7.4. DEVICE PAGE

Interface for starting, stopping, and managing the robot lawn mower.

3.7.5. CLOSED AREA

Option to start the robot in an enclosed area not reachable by perimeter wire.

3.7.6. SETTINGS

Access to robot settings like measurement units, date format, and factory reset.

3.7.7. SPOT CUT / SCHEDULED

Selector to activate/deactivate programmed work schedule or use spot cut.

3.7.8. MOWING SESSIONS

Programming the time and working days for the robot lawn mower.

3.7.9. GO-TO-CUT POINTS

Setting one or more starting points for improved garden coverage.

3.7.10. BORDER CUT

Programming border cutting of the garden on specific days.

3.7.11. ECO MODE

Setting a low power consumption mode to reduce working time.

3.7.12. RAIN SENSOR

Enabling or disabling the rain sensor and setting sensitivity levels.

3.7.13. RUN BESIDE WIRE

Setting maximum navigation distance from the perimeter cable for return to base.

3.7.14. CHANGE BORDER SIGNAL

Changing the perimeter cable signal channel to avoid interferences.

3.7.15. USER MANAGEMENT

Inviting and managing other users for robot operation.

3.7.16. DEALER

Choosing the reference service centre for support.

3.7.17. MESSAGES

Displaying messages and information from STIGA.

3.7.18. PROFILE

Accessing and modifying user account data and password.

OPERATION

4.1. CHECK OF SAFETY DEVICES FOR STARTING THE ROBOT LAWN MOWER

Procedure to check safety devices before starting the robot lawn mower.

4.2. MANUAL FUNCTIONING OF THE ROBOT LAWN MOWER

How to operate the robot lawn mower manually without programming.

4.3. DESCRIPTION OF THE CONTROLS ON THE ROBOT LAWN MOWER

List and explanation of all controls, indicators, and their functions.

4.3.1. SAFE STOP - STOP BUTTON

Explains the function and procedure of the STOP button for safe stopping.

4.3.2. SAFE SHUTDOWN - SAFETY KEY

Procedure for safely shutting down the robot using the safety key.

4.3.3. SWITCHING THE ROBT LAWN MOWER ON AND OFF - ON/OFF BUTTON

How to switch the robot lawn mower on and off using the ON/OFF button.

4.3.4. SCHEDULED PROGRAM / SINGLE WORK CYCLE SELECTION - SCHEDULED PROGRAM BUTTON

How to activate/deactivate scheduled work programs or select single work cycles.

4.3.5. FORCED RETURN TO CHARGING BASE - RETURN TO BASE BUTTON

Procedure to force the robot lawn mower to return to the charging base.

4.3.6. BLUETOOTH STATUS DISPLAY AND UNPAIRING - BLUETOOTH BUTTON

Information on Bluetooth status and how to unpair the device.

4.3.7. DISPLAY OF ALARM STATES-ALARM ICON

Explanation of the alarm icon and its different states.

4.3.8. BATTERY CHARGE DISPLAY-BATTERY ICON

How the battery icon displays the charging status and levels.

4.3.9. STARTING THE ROBOT THE LAWN MOWER - START BUTTON

Procedure to start the robot lawn mower using the START button.

4.4. FUNCTIONING OF THE CHARGING BASE

Explanation of the charging base's warning light and its meanings.

4.5. BATTERY CHARGING

Procedure for manually recharging the robot lawn mower's battery.

4.6. CUTTING HEIGHT ADJUSTMENT

How to adjust the cutting blades' height for optimal grass cutting.

MAINTENANCE

5.1. SCHEDULED MAINTENANCE

Table outlining weekly, monthly, and annual maintenance tasks and references.

5.2. PRODUCT CLEANING

Detailed instructions for cleaning the robot lawn mower and its components.

5.3. REPLACEMENT OF THE CUTTING BLADES

Step-by-step guide for safely replacing the cutting blades.

5.4. WINTER BATTERY MAINTENANCE AND STORAGE

Procedures for battery maintenance and storage during winter.

5.5. BATTERY REPLACEMENT

Information that battery replacement is the responsibility of STIGA staff.

TROUBLESHOOTING

6.1. MAIN MESSAGES FROM APP

Lists common messages from the app and their corresponding solutions.

TRANSPORT, STORAGE AND DISPOSAL

7.1. TRANSPORT

Procedures for safely transporting the robot lawn mower.

7.2. STORAGE

Guidelines for storing the robot lawn mower in a dry, frost-free place.

7.3. DISPOSAL

Instructions for sustainable disposal of the product and its battery.

WARRANTY

8.1. WARRANTY COVERAGE

Details on warranty conditions, coverage, and exclusions.

EC DECLARATION OF CONFORMITY

Related product manuals