Stiga stig

47EN
4. OPERATION
4.3.5. 
The "RETURN TO BASE" button (G) allows to force the robot lawn mower to return to the charging base.
If the button (G) ashes when the cover (B) is opened, the robot lawn mower is already returning to the
charging base.
Procedure:
1. Press the button “STOP” (A) to open the cover (B) and access the control console (C).
2. Press the "RETURN TO BASE" button (G).
3. When the button lights up in green, it means that the function is active.
4. Close the cover (B).
5. The robot lawn mower will start and automatically return to the charging base.
NOTE: If the battery is low, when the "RETURN TO BASE" button (G) is pressed, the battery
icon will ash red to indicate that the action cannot be performed.
NOTE: the robot lawn mower starts only after closing the cover (B).
NOTE: the robot lawn mower will reach the charging base with the cutting device deactivated.
B G
C
A