What to check if the charging base light does not turn on when Stiga Stig 300 is out of the charging base?
If the charging base light on your Stiga Lawn Mower does not turn on when the robot is out of the charging base, it indicates that the supply voltage is missing or there is a fault in the charging base. Check that the power supply unit is plugged in correctly and inspect the integrity of the power supply connection cable.
Why is my Stiga Lawn Mower noisy and vibrating abnormally?
Abnormal vibrations and noise in your Stiga Lawn Mower can stem from several causes. Check for damaged cutting discs or blades and replace them if necessary. Residues like tapes or plastic fragments blocking the cutting device can also be the culprit; switch off the mower in safety conditions and remove any obstructions. Also, if the mower encountered unexpected obstacles like fallen branches, turn it off, clear the area, and restart it. Other potential causes include electric motor failure (in which case, contact an authorized service center for motor replacement) or grass that's too tall. For tall grass, increase the cutting height and consider a preliminary cut with a standard lawn mower.
What to do if my Stiga Stig 300 working area is not mowed completely?
If your Stiga Lawn Mower isn't mowing the entire working area completely, several factors could be responsible. First, consider extending the working hours. Also, check the cutting device for encrustations or residues and clean it. If the pivoting cutting blades are blocked, replace them. If the working area exceeds the mower's capacity, reduce the work area. Finally, consider the batteries: if they're nearing the end of their life cycle, replace them with original spare parts. Also ensure that the batteries are fully charged and that contact points are free from oxidation.
Why Stiga Stig 300 Lawn Mower does not position itself properly inside the charging station?
If your Stiga Lawn Mower isn't positioning itself correctly inside the charging station, it could be due to an incorrectly positioned perimeter cable. Check the connection of the charging station. Another reason could be that the ground next to the recharging base has collapsed. Restore the correct positioning of the charging base.
What to do if Stiga Stig 300 behaves abnormally around perimeter obstacles?
If your Stiga Lawn Mower is behaving abnormally around perimeter obstacles, it is likely due to the perimeter cable being laid incorrectly. Reposition the perimeter cable correctly in a clockwise direction.
Why does the charging base light turn on slowly for Stiga Lawn Mower?
If the charging base light on your Stiga Lawn Mower turns on slowly, it indicates that the perimeter cable is either not connected or is broken. Check the installation and repair the break.
What does it mean if the charging base light turns on with quick flashing on Stiga Stig 300 Lawn Mower?
If the charging base light on your Stiga Lawn Mower is flashing quickly, the perimeter cable might be too short or there could be a fault in the charging base. Check that the length of the perimeter cable is greater than indicated. If necessary, install the resistor. If the problem persists, contact a service centre.
General| Brand | Stiga |
|---|---|
| Model | Stig 300 |
| Category | Lawn Mower |
| Language | English |
This manual refers to the models Stig 300, Stig 600, Stig 1200.
Detailed specifications for Stiga Stig robot lawn mower models.
Key safety warnings and hazard identification for the robot mower.
Rules, prohibitions, and obligations for safe operation and maintenance.
Steps to safely stop and turn off the robot lawn mower.
Explains the manual's role and how to use it effectively.
General description, components, and unpacking of the robot mower.
Defines the meaning of symbols and nameplates on the product.
Instructions for optimal viewing and reading criteria.
Important precautions to follow before starting installation.
Lists components and verifies garden/power supply/cable installation needs.
Criteria for installing the perimeter cable around the garden and obstacles.
Steps for installing perimeter cable, junction, base, and resistor.
Steps for charging the robot lawn mower after installation.
Guide to app setup, pairing, and basic settings like login and registration.
Configuring mowing modes, sessions, points, and advanced functions.
Managing users, dealer, messages, profile, and system settings.
Verifying safety features are correctly set before operation.
Operating the mower without prior programming.
Description and function of all controls on the robot mower.
Selecting operating modes like scheduled, single cycle, or return to base.
Understanding indicators (Bluetooth, Alarm, Battery) and starting the mower.
Manual battery charging and adjusting cutting height.
Recommended maintenance tasks based on frequency.
Instructions for cleaning the robot lawn mower.
Replacing blades, winter battery maintenance, and battery replacement.
Table of common issues, their causes, and solutions.
Interpreting key messages and errors displayed in the app.
Guidelines for safely transporting the robot lawn mower.
Proper procedures for storing and disposing of the robot mower.
List of optional accessories for the robot lawn mower.
Explanation of what the warranty covers and exclusions.
Official declaration of the product's compliance with EU regulations.
To Next Page
