To Next PageTo Next PageWhat to do if the starter motor runs but the engine doesn't start on my Stiga Lawn Mower?
If the starter motor runs but the engine doesn't start on your Stiga Lawn Mower, first, recharge the battery. Then, check the fuel level in the tank and ensure the fuel stopcock (if present) is open. Finally, inspect the fuel filter.
Why is starting difficult or the engine running erratically on my Stiga sd98-108 Lawn Mower?
If you're experiencing difficulty starting your Stiga Lawn Mower or the engine runs erratically, ensure the spark plug cap is securely fitted and that the electrodes are clean with the correct gap. Additionally, clean or replace the air filter, empty the fuel tank and refill with fresh fuel, and check/replace the fuel filter if necessary.
What to do if the starter motor does not run on my Stiga Lawn Mower?
If the starter motor doesn't run when the key is on "START" for your Stiga Lawn Mower, ensure that all starting conditions are met and check all connections. If the battery is badly connected, recharge it. If the fuse (10 A) is blown, replace it.
What to do if my Stiga sd98-108 motor shuts down while working?
If your Stiga Lawn Mower motor shuts down while working, it might be due to the safety devices being activated. Move the disengagement lever to position «B». Also, check if the fuse (10 A) has blown and replace it if necessary.
How to fix an uneven cut with my Stiga Lawn Mower?
If your Stiga Lawn Mower is producing an uneven cut, start by checking the tire pressure and external diameter to ensure the cutting deck is parallel to the ground. Clean the cutting deck if it's full of grass and check and tighten all the engine and frame bolts.
What to do if my Stiga Lawn Mower doesn't move when the drive pedal is pressed?
If your Stiga Lawn Mower doesn't move when the drive pedal is pressed, move it to position «A».
General| Cutting width | 108 cm |
|---|---|
| Power source | Petrol |
| Transmission | Hydrostatic |
| Cutting height range | 25 - 80 mm |
| Cutting height adjustment | Centralized |
| Engine Type | 4-stroke |
Welcomes the user and explains the manual's role in safe and efficient machine use.
Provides information on dealer-serviced operations and personalized maintenance programs.
Explains how warnings, notes, and cross-references are presented for clarity.
Core safety rules and precautions to be followed by the operator at all times.
Emphasizes operator training, proper attire, and thorough area inspection before starting.
Outlines critical safe practices during operation, especially concerning slopes.
Covers essential safety steps before performing maintenance or storing the machine.
Details the meaning and importance of various safety labels affixed to the machine.
Provides specific guidelines and safety measures for towing a trailer with the machine.
Details the essential data and certifications found on the machine's identification plate.
Identifies and describes the function of the primary components of the machine.
Step-by-step instructions for safely removing the machine and its parts from packaging.
Detailed guide for assembling the steering wheel onto the machine.
Instructions for correctly mounting and securing the operator's seat.
Guides on installing and connecting the battery for machine power.
Instructions for properly fitting the stone-guard for operator protection during use.
How to reposition anti-chipping wheels for optimal performance on varied terrain.
Explains the function and operation of the steering wheel and throttle.
Details the key ignition switch positions and the use of the choke for starting.
How to operate the parking brake and engage/disengage the cutting blades.
Explains the dual role of the clutch/brake pedal for drive and stopping.
Operation of the speed lever and the function of the brake pedal.
How to use the drive pedal and the hydrostatic transmission disengagement lever.
Essential safety advice to prevent injury, damage, and improper operation.
Explains how safety features prevent starting or stop the engine.
Guides on adjusting the seat and ensuring correct tyre pressure for optimal performance.
How to check and fill engine oil and fuel, plus other pre-start checks.
Importance of checking the stone-guard for safety before commencing work.
Final checks to confirm the machine is safe and ready for efficient operation.
Step-by-step guide for safely starting the engine in appropriate conditions.
How to start and move the machine without engaging the cutting deck.
Instructions for safely braking the machine, including hydrostatic drive effects.
Safe procedures for engaging and operating the machine in reverse.
How to adjust anti-chipping wheels for optimal cutting on uneven or varied ground.
Procedures for finishing a mowing session and preparing for shutdown.
Steps for safely stopping the engine and securing the machine after use.
Guidelines for cleaning the machine, especially the cutting deck, after each use.
Procedures for storing the machine properly during extended periods of inactivity.
Explains the role of the fuse in protecting the electronic board and troubleshooting.
Crucial safety and operational advice for mowing on inclines.
Safety instructions for loading, securing, and transporting the machine on vehicles.
Tips and techniques for maintaining a healthy and attractive lawn through proper cutting.
Essential safety steps and precautions to take before performing any maintenance.
Outlines regular maintenance tasks and their recommended frequencies for optimal performance.
Specific instructions for engine oil draining, filter checks, and replacements.
Guidelines for maintaining battery health, including proper charging procedures.
How to align the cutting deck for an even cut and to reduce vibrations.
Steps for safely changing the machine's wheels.
Guidance on repairing and replacing the machine's tyres.
How to safely replace fuses protecting the machine's electrical systems.
Detailed instructions for safely dismantling, replacing, and remounting cutting blades.
Guidance on responsible machine use and disposal for environmental care.
Solutions for issues where the starter motor or engine fails to operate correctly.
Troubleshooting for engines that start erratically or have poor performance.
Solutions for unexpected motor shutdowns and problems with blade engagement.
Addressing issues like uneven cuts, excessive vibrations, and braking system faults.
Troubleshooting for erratic movement, uphill performance, and hydrostatic drive failures.
Details on the mulching kit and the battery maintenance charger.
Information on the towing hitch and front bumper protection accessory.
Explains the use of the cloth cover for dust protection.
Description of the snow shovel attachment for clearing snow.
Details the trailer attachment for transporting tools and objects.
Presents measured noise and vibration levels according to relevant EU directives.
Lists the forward and reverse speeds for both mechanical and hydrostatic transmissions.
