28EN
6.3.3 Replacing and repairing the tyres
The tyres are «Tubeless» and so all punctures must be repaired
by a tyre repairer following the procedures required for this
kind of tyre.
6.3.4 Replacing the bulbs (if present)
The bulbs (18W) have a bayonet fitting and are installed in the
bulb holder which can be taken out by turning it anti-clockwise
with pliers.
6.3.5 Replacing a fuse
The machine is fitted with fuses (1) with different capacities
and functions. Specifically:
– 10 A fuse = protects the main and power circuits of the
electronic board. When it blows, the machine stops.
– 25 A fuse = protects the battery charger circuit. When it
blows, the battery gradually runs out and the machine will
have problems starting.
The fuse capacity is indicated on the fuse.
A blown fuse must always be replaced
by one of the same type and ampere rating, and never with
one of another rating.
If problems persist, contact Your Dealer.
IMPORTANT
To Next Page
Loading...
Need help?
General
