13EN
1. INTRODUCTION
(A) Robot lawn mower
(B) Charging base
(C) Starter kit
(C1) Instruction manual
(C2) Charging base xing screws
(C3) Blister with blades and xing screws
(C4) Battery cover and xing screws
(C5) Charging Base connectors
(C6) App Lock Label
(C7) Joint for perimeter cable
2.2.2. MAIN COMPONENTS
• Package 1: robot lawn mower basic kit
• Package 2: Battery Kit (sold separately)
This kit is available in two versions (see Par. 1.4) and is necessary for the operation of the robot lawn
mower.
(D) Battery
(E) Charging base power supply
NOTE: The initial installation or replacement of the battery is the responsibility of STIGA
TECHNICAL ASSISTANCE PERSONNEL and must not be carried out by the user.
APP LOCK
A
C1 C2 C3 C4
C
B
C5 C6 C7
D E
To Next Page
Loading...
