Stiga stig

14 EN
1. INTRODUCTION
• Package 3: Installation kit (optional)
(F) Perimeter cable
(G) Perimeter wire xing pegs
(H) Joint for perimeter cable
(I) Charging base connectors
2.3. UNPACKING
Below all the steps to perform the correct unpacking are described:
1. Open the box of the robot lawn mower;
2. Take out the " Starter Kit” box;
3. Take out the upper containment carton;
4. Take out the robot lawn mower;
5. Take out the charging base.
1 2 3
4 5
F
G
H I