12
Cutting instructions
Always hold the saw firmly with both hands when the
engine
is
running. Place your left hand on front handle bar
and your right hand on rear handle and throttle control.
Wrap your fingers tightly around the handle 'bars, keeping
the handle bar cradled between your thumb and forefinger.
With your hands
in
this position, you can best oppose and
absorb the push,
pUll
and kickback forces of your saw
without having it slip out of your grip. See page
9.
Make
sure your chain saw handle and grip are
in
good condition
and free of moisture, pitch, oil or grease.
Warning!
1.
Do not cut any material other than wood or wooden
objects.
2. Use your chain saw for cutting only. It
is
not designed
for prying or shoveling away limbs, roots or other
objects.
"-
3.
When sawing, make sure that the saw chain does not
touch any foreign materials such as rocks, nails and the
like. Such objects may be flung off, damage the saw
chain
or
cause the saw to kick back. Always maintain a
firm foothold.
Warning!
Never work on a ladder, in a tree or on any other
insecure support. Never use the saw overhead or with
one hand.
To Next Page
Loading...
Need help?
General
