1
~
for Micro and Picco
2
= for Standard'
3
= for Super
4
= Standard, Micro and
Picco filing angle
5
= Super filing angle
6
= Depth gauge setting
7
= Groove cleaner and scale
for groove depth
1
= Sprocket pitch
2
= Chain pitch
3
= Drive link gauge
4
= Groove width
5
= Lug for cleaning bar
groove and oil inlet hole
7
6
4
36
The filing gauge
is
a universal tool for checking the filing
and side plate angles as well as the depth gauge setting
and cutter length.
It can also be used for cleaning the
groove and oil inlet hole on the guide bar and measuring
the groove depth.
04581230121.
M7,5.
61
T.
Printed
in
West Germany
The reference gauge 0000 893
4105
is used for measur-
ing the pitch of the chain and sprocket as
well,
as the drive
link gauge on any chain. It is also provided with a lug for
cleaning the bar groove and oil inlet hole.
x
To Next Page
Loading...
