41FS 300, FS 350, FS 400, FS 450, FS 480
English / USA
1)
STIHL recommends that this work be done by
a STIHL servicing dealer
Please note that the following maintenance intervals apply for normal operating
conditions. If your daily working time is longer than normal or cutting conditions
are difficult (very dusty work area etc.), shorten the specified intervals accordingly.
before
starting work
after finishing
work or daily
after each
refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Cutting tools
Inspect
XX
Replace
X
Check tightness
XX
Metal cutting tools Sharpen
XX
Gearbox lubrication
Check
X
Replenish
X
Safety labels Replace
X
To Next Page
Loading...
