Need help?Do you have a question about the Stihl FR 460 TC-M and is the answer not in the manual?
General| Brand | Stihl |
|---|---|
| Model | FR 460 TC-M |
| Category | Brush Cutter |
| Language | English |
Explains the meaning of pictograms found on the machine.
Explains warning and notice symbols used within the manual for safety.
Discusses STIHL's product improvement policy and its impact on the manual.
Essential safety measures to reduce the risk of personal injury and property damage.
Details required protective clothing and equipment for safe operation.
Steps to prepare the machine for fueling.
How to safely open the fuel tank cap.
Instructions for filling the fuel tank.
How to safely close the fuel tank cap.
Steps to start the engine using the electric starter.
Steps to start the engine without the electric starter.
Special instructions for the initial start-up of the machine.
Troubleshooting for problems with the electric starter.
Steps to diagnose and resolve starting problems.
Procedure for starting a flooded engine.
Emphasizes working calmly, carefully, maintaining distance, and awareness of surroundings.
Addresses risks of toxic exhaust fumes and the need for proper ventilation.
Guidelines for checking the tool after heavy loads or falls.
Specific instructions for using mowing heads.
Guidance on using metal cutting attachments safely and effectively.
Details about the Polycut mowing head and its usage.
Guidance on selecting correct combinations for safety.
Lists various STIHL mowing head models.
Describes different types of deflectors and their uses.
Information on available handle types.
Steps to mount the support frame to the powerhead.
Instructions for connecting the drive tube.
Steps to assemble the loop handle and barrier bar.
Steps to assemble the loop handle without a barrier bar.
How to properly secure the loop handle.
How to check the throttle cable position.
Instructions for fitting the skirt and blade to the deflector.
Steps to attach the skirt to the deflector.
How to remove the skirt from the deflector.
How to position the tool for attachment mounting.
Steps for fitting the thrust plate.
How to fit a mowing head using screw mounting.
Steps to remove the mowing head.
Steps to secure the metal cutting attachment.
Steps to remove the metal cutting attachment.
Information on STIHL's ready-to-use fuel mix.
Guidelines for mixing gasoline and engine oil.
Recommendations for gasoline type and quality.
Guidance on selecting appropriate engine oil.
Details on the correct fuel mix ratio.
Best practices for storing fuel safely.
Steps to adjust the harness straps for a proper fit.
Identification and function of controls on the handle.
Explanation of the stop switch and ignition system operation.
Steps to diagnose and resolve starting problems.
Procedure for starting a flooded engine.
Steps to disconnect the drive tube for transport.
How to attach the stub shaft to the support frame.
Steps for connecting the drive tube.
Specific instructions for the machine's break-in period.
Advice for normal operation.
Procedures to follow after completing work.
Details on the special filter element for winter use.
How to prevent carburetor icing in cold weather.
Information on cover plate kits for winter operation.
Steps to remove the spark plug.
How to check and maintain the spark plug.
Steps to install a new spark plug.
Steps to replace the nylon line in mowing heads.
How to adjust nylon line feed for different mowing heads.
Fitting nylon line to the PolyCut.
Replacing cutting blades on the PolyCut.
Overview of routine maintenance tasks.
Lists parts that normally wear out and require replacement.
To Next Page
