Need help?Do you have a question about the Stihl FR 350 and is the answer not in the manual?
General| Brand | Stihl |
|---|---|
| Model | FR 350 |
| Category | Brush Cutter |
| Language | English |
Explains symbols used in the manual for clarity.
Details different ways text steps are presented for ease of understanding.
Describes components that may vary or be optional accessories.
Explains STIHL's commitment to continuous product improvement.
Covers essential safety rules for operating the brushcutter, including user fitness and environmental considerations.
Advises users with pacemakers about potential electromagnetic interference from the unit.
Specifies types of clothing, footwear, headwear, eye, and hearing protection needed.
Provides instructions on how to safely secure the unit when transporting it in a vehicle.
Highlights hazards of gasoline and precautions like no smoking or fueling hot engines.
Details steps for safe fueling, including cap handling and spill prevention.
Outlines pre-operation checks and preparations to ensure the machine is safe and ready.
Details the correct procedure for starting the brushcutter's engine safely.
Explains how to properly hold and maintain balance and control of the brushcutter.
Covers emergency shutdown and throwing off the brushcutter.
Ensures bystanders stay clear of the operating area to prevent injury.
Addresses slippery conditions, obstacles, hearing protection, and exhaust fumes.
Warns about the dangers of toxic exhaust fumes and the need for proper ventilation.
Emphasizes the risk of injury from thrown objects and the need for proper deflectors.
Provides specific instructions for using and maintaining mowing heads.
Gives guidance on sharpening and safe use of metal cutting tools.
Explains the meaning of arrows on deflectors and their usage with mowing heads.
Details the use of nylon line for edging and trimming safely.
Describes the STIHL PolyCut head and its wear limits for safe operation.
Explains the danger of kickout with rigid cutting blades and how it occurs.
Provides usage instructions for grass cutting blades, including sweeping technique.
Details the application and safe usage of the brush knife for cutting scrub and young stands.
Step-by-step instructions for attaching the support frame to the powerhead.
Guide on how to correctly connect the flexible shaft to the powerhead and drive tube.
Instructions for fitting the loop handle and barrier bar.
Instructions for fitting the loop handle without the barrier bar.
Details how to properly secure the loop handle to the control handle.
Steps for correctly routing and securing the throttle cable along the shaft.
Explains how to adjust the throttle cable for proper engine speed control.
Enumerates the different STIHL cutting tools available for the brushcutter.
Lists the various deflectors compatible with the brushcutter.
Identifies the types of handles that can be fitted to the brushcutter.
Provides guidance on selecting correct combinations for safety and to avoid accidents.
Instructions for mounting different types of deflectors onto the brushcutter.
Details how to attach the skirt and blade to the deflector for mowing heads.
Steps to prepare the brushcutter for mounting cutting tools.
Explains the hardware used for mounting different cutting tools.
Lists the parts included for mounting metal cutting tools.
Lists the parts included for mounting mowing heads.
Describes the method to block the drive shaft for safe cutting tool installation.
Instructions for mounting specific STIHL mowing heads like SuperCut and AutoCut.
Instructions for mounting the STIHL FixCut 25-2 mowing head.
Steps for removing specific STIHL mowing heads.
Steps for removing the STIHL FixCut 25-2 mowing head.
How to adjust the nylon line on the STIHL SuperCut mowing head.
Refers to separate instructions for adjusting line on other mowing heads.
Directs users to separate instructions for replacing lines or blades.
Instructions for mounting metal cutting tools, noting deflector requirements.
Guidance on selecting and using appropriate gasoline for the engine.
Recommendations for choosing and using two-stroke engine oil.
Specifies correct fuel-oil mix ratios for STIHL engines.
Information about STIHL's ready-to-use fuel mix.
Warnings about using unsuitable fuels or incorrect mix ratios.
Guidelines for safely storing fuel, including fuel mix aging.
Detailed steps for safely filling the fuel tank.
Instructions for replacing the fuel pickup body annually.
Steps to adjust the harness straps for a comfortable fit.
How to adjust the backpack for proper fit and security.
Instructions on how to safely remove the backpack.
Identifies and explains the function of the main operating controls.
Describes the different positions of the slide control and their meaning.
Step-by-step guide for starting the engine, including choke and decompression valve usage.
Ensures correct unit placement and secure footing before starting.
Details proper technique for pulling the starter rope without damage.
Actions to take once the engine starts firing, including choke adjustment and idle speed.
How to safely stop the engine and what to do at very low temperatures.
Troubleshooting steps for a flooded engine or if it fails to start.
Further troubleshooting for persistent starting issues, including spark plug checks.
Guidance on how to operate the machine during its initial break-in phase.
Advice on running the engine at idle after prolonged full-throttle use.
Instructions for short and long-term storage of the machine.
Specific steps for cleaning the air filter on the FR 350 model.
Specific steps for cleaning the air filter on the FR 450 and FR 480 models.
Overview of the carburetor's factory settings and adjustment capabilities.
Steps for setting the carburetor to its standard configuration.
Correcting idle speed to prevent engine stalling.
Adjusting idle speed when the cutting tool spins at idle.
Troubleshooting erratic idling and poor acceleration.
Adjusting the carburetor for optimal performance at higher altitudes.
Addressing common causes of spark plug fouling like fuel mix or dirty air filter.
When and how to replace the spark plug for optimal performance.
Discusses potential causes of unsatisfactory engine running behavior, possibly related to the muffler.
Instructions on checking and replenishing grease in the gearbox.
Details the procedure for lubricating the flexible shaft for smooth operation.
Step-by-step guide to replacing a broken starter rope.
Instructions on how to properly tension the rewind spring for the starter rope.
Specific steps for replacing the rewind spring on the FR 350 model.
Specific steps for replacing the rewind spring on the FR 450 and FR 480 models.
Guidelines for storing the brushcutter for periods of about 3 months or longer.
Instructions on how to sharpen metal cutting tools using files.
Advice on checking and rebalancing blades after sharpening.
A comprehensive chart detailing maintenance intervals for various machine components.
Emphasizes the importance of regular maintenance and recommends authorized dealers.
Lists components of the power tool that are subject to normal wear and tear.
Identifies and labels the main operating controls of the brushcutter.
Identifies and labels additional components like harness, hip belt, and muffler.
Details engine displacement, bore, stroke, and power output.
Provides sound power level measurements for different configurations.
Lists vibration measurement values for left and right handles.
Lists various cutting tools available as special accessories.
Specifies fuel tank capacities and dry weight for different models.
Guidelines on user-performed maintenance and when to contact a servicing dealer.
Lists specific accessories for cutting tools like nylon line and transport guards.
Details sharpening files and balancers for metal cutting tools.
Lists hardware required for mounting metal cutting tools.
Declares that the machine conforms to relevant directives and standards.
Information about STIHL's ISO 9001 quality management system certification.
To Next Page
