Stihl FR 350 - Approved Power Tool Attachments; Mounting the Deflector; Fitting skirt and blade

19FR 350, FR 450, FR 480
English
T
The following STIHL attachments may
be mounted to the basic power tool:
1)
Barrier bar must be fitted on the
loop handle
Mounting the deflector
1 = Deflector approved for all cutting
tools
2 = Deflector approved for use with
mowing heads only
: Place the deflector on the
gearhead.
: Fit the plate (3) and line it up.
: Insert M 5 x 18 screws and tighten
down firmly.
Fitting skirt and blade
These parts must be fitted to the
deflector (1) when you use a
mowing head:
: Slide the lower guide slot of the
skirt (4) onto the deflector (1) – it
must snap into position.
: Push the blade (5) into the upper
guide slot on the skirt and line it up
with the first hole.
: Fit the screw and tighten it down
firmly.
Attachment Application
BF
1)
Cultivator
Approved Power Tool
Attachments
228BA032 KN
BF
Mounting the Deflector
002BA102 KN
1
3
2
3
4
1
5
4
002BA103 KN