11FR 350, FR 450, FR 480
English
Symbols on Deflectors
An arrow on the deflector shows the
correct direction of rotation of the cutting
tools.
Use deflector in
combination with
mowing heads
only. Do not use
metal cutting tools.
Mowing Head with Nylon Line
Nylon line achieves a soft cut for edging
and trimming around fence posts, trees,
etc. – less risk of damaging tree bark.
To reduce the risk of injury, never
use steel wire in place of the nylon
cutting line.
STIHL PolyCut Cutting Head with
Plastic Blades
The PolyCut is used for edging fields not
bordered by posts, fences, trees or other
obstacles.
Check wear limit marks!
If one of the marks on the PolyCut is
worn through (arrow): To reduce the risk
of injury from thrown parts, stop using
the head immediately. Install a new
one.
It is important to follow the maintenance
instructions for the PolyCut cutting head!
000BA015 KN
002BA177 KN
To Next Page
Loading...
