Need help?Do you have a question about the Stihl FS 160 and is the answer not in the manual?
General| Weight | 7.4 kg |
|---|---|
| Cutting Diameter | 420 mm |
| Sound Power Level | 109 dB(A) |
| Displacement | 29.8 cm³ |
| Overall length | 176 cm |
| Cutting Attachment | Metal blade |
Explains symbols used in the manual to aid understanding.
Explains symbols used for warnings and notices.
Details required protective clothing and gear for safe operation.
Instructions on how to safely transport the machine.
Guidelines for safely refueling the machine.
Pre-operation checks to ensure safe and proper functioning.
How to properly hold and control the tool for safe operation.
Key operational safety guidelines and emergency procedures.
Specific safety advice for using mowing heads.
Safety precautions for metal cutting attachments.
Information on vibration risks and prolonged usage effects.
Guidance on servicing and repair procedures.
Explains symbols on deflectors for correct attachment.
Safe usage guidelines for grass cutting blades.
Safe usage guidelines for brush knives.
Safety advice for using shredder blades.
Safety instructions for using circular saw blades.
Specific kickout risks associated with circular saw blades.
Steps to mount the handlebar to the support.
Steps to attach the control handle to the handlebar.
How to adjust and secure the bike handle for optimal positioning.
Procedure for adjusting the throttle cable during assembly.
How to install retainers for the throttle cable.
Check throttle cable adjustment for proper function.
How to install retainers for the throttle cable.
Specific mounting procedures for nylon line mowing heads.
Safely positioning the tool for attachment mounting.
Information on mounting hardware included with the machine.
How to fit guard rings for mowing attachments.
How to fit guard rings for sawing attachments.
Specific instructions for screw-mounted mowing heads.
Attaching the shredder blade.
How to properly secure the shredder blade.
Detaching the shredder blade.
Correct alignment of circular saw blades.
Attaching the circular saw blades.
How to properly secure circular saw blades.
Detaching the circular saw blades.
Specifications for suitable two-stroke engine oils.
Recommended fuel and oil mix ratios.
Steps to take before fueling the machine.
How to correctly fill the fuel tank.
Identification of engine controls like slide control and throttle.
Explanation of the slide control symbols for stopping.
Step-by-step guide to starting the engine.
Specific starting procedure for a cold engine.
Specific starting procedure for a warm engine.
Instructions for pulling the starter grip.
Steps to take if the engine fails to start.
Further troubleshooting for starting issues.
How to adjust the throttle cable for proper function.
General guidance on using transport guards.
Specific transport guard for 230mm grass cutting blades.
Transport guard for grass cutting blades up to 260 mm.
Transport guard for circular saw blades.
Use of the universal transport guard.
How to operate the machine during its initial period.
Best practices for operating the machine.
Procedures after completing work, including short-term storage.
Factory settings for the carburetor.
Adjusting the high speed screw for maximum RPM.
Specific carburetor tuning for mowing heads.
Adjusting the carburetor for high altitude operation.
Adjusting the carburetor for sea level operation.
Specific carburetor tuning for metal cutting attachments.
Diagnosing why the engine stops at idle.
Correcting idle speed for attachment rotation.
Addressing engine issues from lean idle settings.
Addressing engine issues from rich idle settings.
Steps to remove the spark plug.
Steps to install the spark plug.
Methods for adjusting nylon line on different mowing heads.
How to adjust line on STIHL SuperCut.
How to adjust line on STIHL AutoCut.
How to adjust line on STIHL TrimCut.
Procedures for replacing nylon line.
Replacing line on STIHL PolyCut.
Replacing line on DuroCut and PolyCut.
Instructions for replacing cutting blades.
Replacing blades on STIHL PolyCut.
Overview of routine maintenance tasks.
Details on the engine type and power.
Specific technical data for the FS 160 model.
Specific technical data for the FS 220 model.
Specific technical data for the FS 280 model.
Specific technical data for the FS 290 model.
Information on the ignition system components.
Details about the fuel system components.
Weight specifications for different models.
Overall length specifications for different models.
Measured noise and vibration levels.
Sound pressure levels according to ISO standard.
Vibration levels according to ISO standard.
Measured sound power levels for each model.
Guaranteed sound power levels for each model.
To Next Page
