Need help?Do you have a question about the Stihl FS 88 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Weight | 5.2 kg |
| Sound Power Level | 106 dB(A) |
| Cutting Blade Diameter | 230 mm |
| Line Diameter | 2.4 mm |
Highlights the importance of reading and understanding the manual for safe brushcutter operation.
Details serious injury risks from improper brushcutter use and the need for safety precautions.
Illustrates and labels components of the brushcutter with a bike handle configuration.
Provides detailed explanations for various parts and their functions on the brushcutter.
Illustrates and labels components for loop handle and loop handle with standoff lever.
Explains the function of parts specific to loop handle and standoff lever configurations.
General warnings about brushcutter hazards, operator responsibility, and bystander safety.
Details operator requirements and specified protective clothing for safe use.
Guidance on modifications, safe transport, and pre-operation checks for the brushcutter.
Emphasizes safety during fueling due to gasoline's flammability and potential for vapor buildup.
Outlines the general procedure for starting the brushcutter, emphasizing safety and proper technique.
Covers safe operating practices, including two-handed grip, proper footing, and terrain considerations.
Warns against cutting specific materials and details important adjustments for safe operation.
Reiterates warnings about improper use and emphasizes proper equipment selection for safety.
Explains the use of various mowing heads and associated deflectors for clean finishes.
Details specific STIHL mowing heads and their line management, plus grass blade usage.
Provides instructions and warnings for using the brush knife for clearing weeds and scrub.
Details the application of circular saw blades for thinning brush and small trees, with safety warnings.
Explains the phenomenon of kickout with rigid blades and how to mitigate the risks.
Stresses using genuine parts, following manual instructions, and seeking authorized service.
Covers regular checks of cutting tools, fuel cap, spark plug, and muffler safety requirements.
Lists available cutting tools and explains the importance of matching deflectors and handles for safety.
Step-by-step guide for assembling the bike handle onto the brushcutter.
Instructions for attaching the loop handle and standoff lever to the brushcutter.
Details the process for mounting Version A of the loop handle on FS 88 and FS 108 models.
Details the process for mounting Version B of the loop handle on FS 88 and FS 108 models.
Instructions for fitting the deflector for various cutting tools and the fitting stop for saw blades.
General steps for mounting cutting tools, including blocking the output shaft and removing hardware.
Instructions for mounting STIHL Supercut and Autocut mowing heads.
Instructions for mounting STIHL Autocut 24-2 and Polymatic 30-2 mowing heads.
Instructions for mounting STIHL Polycut 40-3 and Fixed Line Head.
Steps for mounting grass cutting blades (230-4, 230-8) and the brush knife (250).
Instructions for mounting circular saw blades, including fitting the correct stop.
Specifies fuel types, octane ratings, and oil mixtures required for STIHL engines.
Details the steps for safely fueling the brushcutter and fitting the shoulder strap harness.
Instructions for fitting and adjusting the full harness for proper brushcutter balance.
Details the steps for starting the engine, including choke settings and safety checks.
Instructions for pulling the starter grip and managing the engine as it starts and returns to idle.
Procedures for shutting down the engine and troubleshooting common starting problems like flooding.
Establishes the starting point for fine-tuning the carburetor for optimal performance.
Details fine-tuning procedures for different cutting heads and metal cutting tools.
Guides on adjusting idle speed and diagnosing issues like tool rotation or poor acceleration.
Explains the break-in period for new machines and general operating procedures during use.
Instructions for checking, cleaning, and replacing the spark plug and air filter.
Provides instructions for checking and lubricating the gearbox and drive shaft.
Guide on sharpening the 230-4 grass cutting blade, including angles and avoiding imbalance.
Instructions for sharpening the 230-8 grass cutting blade, focusing on wear limits and balance.
Details on sharpening the brush knife, including specific edges and avoiding out-of-balance.
Instructions for sharpening the chisel tooth circular saw blade, including on-unit sharpening.
Guidance on resetting and sharpening the scratcher tooth circular saw blade.
Steps for removing the starter cover and rewind starter mechanism.
Instructions for replacing the starter rope and the rewind spring, including lubrication.
Detailed steps for tensioning the rewind spring correctly after installation.
Procedure for checking and cleaning the spark arresting screen inside the muffler.
Guidelines for storing the brushcutter for short or long periods, including fuel tank preparation.
Details engine type, displacement, bore, stroke, power, and fuel system components.
Lists the weights of the brushcutter models with different handle configurations.
Lists available cutting tools, part numbers, and nylon line options for mowing heads.
Details available accessories like straps, goggles, and STIHL lubricants.
To Next Page
