)n
3-
Sharpen correctly
•
If
slightly dull: Use
flat file (3) 0814 212
3310-
In
case of more serious wear
or
nicks: Resharpen with a grinder -
maintain a sharpening angle of
30
0
(A) on the cutting edge (1).
• File back the cutting edge
parallel to the lines on the sharpen-
ing template.
• Resharpen frequently, take
away as little material as
possible - two or three strokes
of the file are usually enough.
46
ay
I !
~)
I
'--.-:
-,
-,I
\
\
Circular saw blade 200 (chisel tooth)
Never straighten
or
weld a bent
or
cracked circular saw blade - it might
shatter and cause serious
or
fatal injury.
Sharpening circular
saw
blade on the unit
• Cut a vertical slit
in
the
top of a tree stump
- lean the unit
against the stump so that the saw
blade rests in the slil.
• Turn the blade with one hand
while resharpening
-
Wear gloves!
Sharpen correctly
• File only the side plate (1).
•
If
slightly dull: Use
file holder (2) 5605 750 4343
and matching 5.5mm dia.
round file (3)
0811
411
8108.
l0
case of major
or
very irregular wear:
Use an electric grinder.
• File right and left-hand teeth
in
the direction of sel.
To Next Page
Loading...
Need help?
General
