~oo~
((
\\3))
2
• Pull the starter grip slowly with your
right hand until you feel
it
engage -
and then give
it
a brisk strong pull.
Do not pull out starter rope more
than 70cm (27") -
it
might break.
Do not let the starter grip snap
back - guide
it
slowly into the
housing so that the starter rope
can rewind properly.
When engine begins to fire:
If
engine is cold:
Set choke lever (4)
to
-
and continue cranking until engine runs.
If
engine
is
warm:
Continue cranking until engine
runs_
As soon as warm engine runs:
• Blip the throttle trigger (2) -
the slide control (3) moves to the
run
position
I,
and the engine
returns
to
idling speed.
•
Make~ure
carburetor is correctly
adj,usted - cutting tool must not
rotate when engine
is
idling.
Your brushcutter
is
ready for
operation.
35