Need help?Do you have a question about the Stihl FR 480 C and is the answer not in the manual?
General| Brand | Stihl |
|---|---|
| Model | FR 480 C |
| Category | Brush Cutter |
| Language | English |
Explains pictograms and text symbols used in the manual for clarity.
Details STIHL's commitment to product improvement and potential manual updates.
Covers reading manual, user responsibility, keeping bystanders away, and securing the tool.
Outlines physical/mental health, pacemakers, substance influence, and approved attachments.
Details the integrated battery, its handling, and replacement limitations.
Emphasizes using original units, checking cords, and proper unplugging procedures.
Provides safety instructions for using the 12V/24V charging cable with vehicle outlets.
Lists essential protective clothing, footwear, head/eye, and hearing protection for safe operation.
Details safe fuel handling, filling, cap security, and preparation steps before fueling.
Covers essential checks of assembly, controls, spark plug, cutting tool, and deflectors before starting.
Combines safe holding, control, and engine starting procedures, including safety distances.
Outlines emergency stops, safety distances, handling slippery conditions, obstacles, and footing.
Addresses exhaust fumes, noise, dust, vapor, smoke, and hot components.
Details machine checks after loads, cutting attachment inspection, and cleaning.
Covers operating in difficult terrain, near animals, and leaving the tool unattended.
Details usage of mowing heads with nylon lines for trimming tasks.
Describes the STIHL Polycut Mowing Head with polymer blades for meadow mowing.
Guides on using the brush knife for wild growth and scrub, emphasizing caution.
Explains using the grass cutting blade for grass and weeds, and kickback risks.
Specifies safe combinations of cutting attachments, deflectors, and handles for accident prevention.
Lists approved mowing heads and metal cutting attachments for the power tool.
Lists approved attachments that can be mounted to the basic power tool.
Explains the STIHL electric starter system, its components, and battery charging.
Details the steps for charging the battery using the power supply unit.
Explains how to charge the battery using a 12V/24V charging cable and vehicle socket.
Provides instructions for securely mounting the support frame to the powerhead.
Guides on correctly installing the flexible shaft into the powerhead and protective tube.
Details the steps for mounting the loop handle and barrier bar onto the drive tube.
Instructions for mounting the loop handle when a barrier bar is not used.
Explains how to properly secure the loop handle to the control handle.
Guides on routing and fitting the throttle cable along the flexible shaft.
Details how to properly adjust the throttle cable for correct operation of throttle positions.
Provides instructions for mounting the deflector onto the gearbox flange.
Instructions for fitting the skirt and blade to the deflector for mowing heads.
Covers the process of mounting, blocking the shaft, and removing cutting attachments and hardware.
Guides on mounting various STIHL mowing heads, including specific instructions for FixCut.
Outlines the steps for removing mowing heads from the output shaft.
Explains automatic and manual nylon line advancement and safety during adjustment.
Refers to instructions for replacing nylon lines or cutting blades.
Details mounting metal cutting attachments, including blade direction and securing nuts.
Specifies the required gasoline, engine oil, and correct mix ratios for optimal engine performance.
Provides a table with examples for mixing fuel at the recommended 50:1 ratio.
Guides on proper storage of fuel mix in approved canisters, including shelf life.
Details safe fueling practices, cleaning the filler cap, and replacing the fuel pickup body.
Guides on adjusting harness straps, waist belt, and ensuring a snug, secure fit.
Outlines the steps to safely remove the backpack, including opening the quick-release fastener.
Instructions for quickly removing the backpack in emergencies, emphasizing waist belt release.
Explains the slide control, starter switch, and the procedure for starting and stopping the engine.
Details the procedure for stopping the engine using the slide control.
Addresses issues like insufficient battery charge, low temperature, and refueling.
Provides guidance on checking and adjusting the throttle cable for proper operation.
Covers break-in period, during operation, and after-work procedures.
Details how to access, clean, and replace the air filter element.
Explains general information and standard settings for carburetor adjustment.
Guides on adjusting idle speed for smooth running, attachment stop, and fine-tuning.
Covers checking the spark plug, electrode gap, and replacement intervals.
Details how to check, clean, and install the spark plug correctly.
Addresses potential issues with engine running, suggesting muffler checks.
Instructions for checking grease level and lubricating the gearbox.
Guides on lubricating the flexible shaft and protective tube for smooth operation.
Information on the rewind starter mechanism and recommended service intervals.
Provides instructions for storing the machine for extended periods, including fuel draining.
Details how to sharpen metal cutting blades using files or grinders.
Explains the importance of checking and re-balancing cutting attachments after sharpening.
A comprehensive chart detailing maintenance tasks and their recommended frequencies.
Emphasizes regular performance of maintenance operations by owner or dealer.
Lists components that are subject to normal wear and require eventual replacement.
Stresses following manual instructions to reduce wear and prevent damage.
Outlines user liability for damage caused by non-compliance with safety and operating instructions.
Lists parts like cutting attachments, filters, and spark plugs that are subject to wear.
Identifies parts related to the control handle, drive, and fuel system.
Identifies main components of the power unit including the starter mechanism and anti-vibration elements.
Identifies support frame, padding, straps, belt, and engine components.
Details various mowing heads, deflectors, blades, skirts, and metal attachments.
Lists engine displacement, bore, stroke, power, and speed specifications.
Details ignition system, fuel tank capacity, weight, and overall length.
Covers sound levels, vibration data, battery compliance, and REACH regulations.
Lists available cutting attachments, sharpening aids, mounting hardware, and other accessories.
Advises on performing maintenance and using approved replacement parts, recommending authorized dealers.
Provides instructions for environmentally friendly disposal of the machine and accessories.
States the machine's compliance with relevant EU directives and standards.
Explains STIHL's adherence to the ISO 9001 standard for quality management systems.
To Next Page
