All other versions
•
••
•
Observe safety precautions -
see section "Safety Precautions".
Push hand guard forward (1):
The chain is now locked -
Press throttle trigger interlock (2)
•
••
•
Master Control lever to:
For cold start l
For warm start n
(even if engine has been running
but is still cold)
•
••
•
Place your saw on the ground -
make sure you have a firm footing -
check that chain is not touching any
object or the ground -
bystanders must be well clear of
general work area of the saw -
•
••
•
Hold the saw firmly on the ground
with your left hand on the
front handle -
your thumb should be under
the handle -
•
••
•
put your right foot into the rear
handle and press down.
Alternative method of starting:
•
••
•
Hold the rear handle tightly be-
tween your legs, just above the
knees -
•
••
•
grip the front handle firmly with your
left hand -
your thumb should be under the
handle -
137BA005 KN
2
1
143BA018 KN
143BA019 KN
066 31
To Next Page
Loading...
