What to do if Stihl cordless product runtime is too short?
If the runtime of your Stihl cordless product is too short, it could be due to the battery not being fully charged. Recharge the battery fully. Alternatively, the normal battery life may have been exceeded, indicating it's time to replace the battery.
What to do if Stihl AP belt bag with connecting cable is too hot?
If the Stihl AP belt bag with connecting cable is too hot, remove the battery and allow the AP belt bag with connecting cable to cool down.
Why Stihl cordless product does not run after switch-on?
If your Stihl cordless product doesn't run after being switched on, several factors could be at play. It could be due to a battery with low charge, which requires a full recharge. The battery might be too hot or too cold, in which case you should remove it and allow it to cool down or warm up. Another possibility is a malfunction in the battery itself. Try removing and reinserting the battery. Also, ensure there's proper electrical contact between the cordless product and the battery by cleaning the electrical contacts. Lastly, check if the cordless product or battery is damp and allow it to dry if necessary.
General| Brand | Stihl |
|---|---|
| Model | AP |
| Category | Cables and connectors |
| Language | English |
Provides a welcome message and introduces the STIHL product.
Explains how to navigate the manual and understand its structure.
Lists related documents and local safety regulations to consult.
Explains warning symbols, text symbols, and how to access related content.
Identifies product components and explains battery status indicators.
Covers critical warnings regarding product use, operator qualifications, and work area safety.
Details safety requirements for the belt bag, battery, and connecting cable to be in a safe condition.
Provides guidelines for safe operation, handling during transport, and proper storage.
Specifies safe practices for cleaning, maintenance, and repair procedures, emphasizing professional service.
Steps to prepare the AP belt bag with connecting cable, including cleaning and checks.
Explains checking battery status via LEDs and beeps, and how to attach the belt bag.
Guidance on adjusting the connecting cable length for user comfort and application needs.
Details how to connect and disconnect the AP belt bag to STIHL cordless products.
Procedures for testing the battery and actions to take after finishing work.
Guidelines for safely transporting the AP belt bag and battery, including packaging.
Guidelines for safely storing the AP belt bag and battery, including temperature and reachability.
Instructions for cleaning the AP belt bag, battery, and connecting cable contacts.
Information on servicing and repairing the AP battery bag and battery, emphasizing professional service.
Provides solutions for common issues indicated by LEDs, beeps, and product behavior.
Details technical specifications for the STIHL AP battery and REACH compliance information.
Information on obtaining original STIHL parts and responsible disposal of components.
To Next Page
