What does it mean if 3 LEDs glow red on Stihl BGA 45?
If 3 LEDs glow red on your Stihl Blower, it indicates that the integrated battery is too hot (remove the activation key and allow the blower to cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C)) or there is moisture in the blower (allow the blower to dry).
Why Stihl Blower is not being charged?
The Stihl Blower might not be charging because the integrated battery is too hot or too cold. Allow the blower to warm up or cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C). Operate the charger only in enclosed, dry rooms at ambient temperatures of 32 °F to 104 °F (0 °C to 40 °C).
What to do if Stihl Blower does not start when switched on?
If your Stihl Blower doesn't start when switched on, the activation key may not be fully inserted. Remove the activation key, visually check the electrical contacts of the activation key, and then reinsert the activation key.
Why Stihl BGA 45 Blower runtime is too short?
If the Stihl Blower runtime is too short, ensure the blower is fully charged. If the issue persists, it's possible that the normal blower life has been exceeded, and the blower may need to be replaced.
What to do if my Stihl BGA 45 Blower is not being charged?
If your Stihl Blower is not being charged, it might be because the blower is too hot. Remove the activation key and allow the blower to cool down. If the issue persists, there may be a malfunction in the blower or charging cable. Remove the activation key and contact a STIHL servicing dealer for assistance.
Why is the runtime of my Stihl BGA 45 Blower so short?
If your Stihl Blower runtime is too short, ensure that the blower is fully charged. If the issue persists, it may be that the normal blower life has been exceeded, and you may need to replace the blower.
Why is the Stihl Blower runtime so short?
If your Stihl Blower's runtime is too short, ensure that the blower is fully charged. If the issue persists, it may be that the normal blower life has been exceeded, and you may need to replace the blower.
What to do if 3 LEDs flash red on Stihl BGA 45 Blower?
If 3 LEDs flash red on your Stihl Blower, it indicates a malfunction in the blower. Do not attempt to use it and have it checked by a servicing dealer.
What to do if Stihl BGA 45 cuts out during operation?
If your Stihl Blower cuts out during operation, it could be due to the integrated battery being too hot (remove the activation key and allow the blower to cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C)) or an electrical malfunction (switch off the blower, wait at least 5 seconds, and switch it back on).
Why does my Stihl BGA 45 cut out during operation?
If your Stihl Blower cuts out during operation, it could be due to a couple of reasons. The blower might be overheating; in this case, remove the activation key and allow it to cool down. Alternatively, there may be an electrical malfunction. Try switching off the blower, waiting 5 seconds, and then switching it on again to see if that resolves the issue.
General| Type | Handheld blower |
|---|---|
| Power | - W |
| Airspeed | 158.4 km/h |
| Working type | Blowing |
| Product color | Black, Orange, White |
| Working technology | Electric |
| Battery life | 10 min |
| Battery voltage | 18 V |
| Battery level indicator | Yes |
Weight and Dimensions| Weight | 2200 g |
|---|
This blower is designed for blowing leaves, grass, and similar lightweight material.
Working with the blower can be strenuous. The operator must be in good physical condition and mental health.
To reduce the risk of personal injury, always wear proper clothing and protective apparel, including proper eye protection.
To reduce the risk of electric shock, do not expose the blower to rain, water or excessive moisture.
Use of an unauthorized charging device can damage the lithium ion battery inside the blower.
To reduce the risk of personal injury, never work with the blower in the rain or in wet or damp conditions.
Make sure the activation key is removed before starting assembly. Never operate your blower without a properly mounted blower tube and nozzle.
In the event of an emergency, switch off the motor immediately and remove the activation key.
There are no user-authorized repairs for the blower or charger. To reduce the risk of fire, electric shock or other personal injury.
This section contains the general safety warnings and instructions for battery-powered products.
Never operate your blower if it is modified, damaged, improperly adjusted or maintained, not completely and securely assembled or not functioning properly.
To reduce the risk of personal injury from unintended activation or unauthorized use, switch off the motor and remove the activation key.
To Next Page
