Stihl BGA 56 - 11 Charging the Battery; 11.1 Setting up the Charger

0458-712-0121-B
15
English 10 Testing the Blower and Battery
► If air continues to flow from nozzle: Remove the battery
and contact your STIHL servicing dealer.
Blower has a malfunction.
10.1 Checking the Controls
Trigger
► Remove the battery.
► Pull the trigger.
► If the trigger is stiff or does not spring back to its idle
position: Do not use the blower and contact your STIHL
servicing dealer.
The trigger has a malfunction.
Switching On
► Fit the battery.
► Pull the trigger and hold it there.
Air flows from the nozzle.
► If 3 LEDs flash red: Remove the battery and contact your
STIHL servicing dealer.
Malfunction in blower.
► Release the trigger.
No air flows from the nozzle.
► If air continues to flow from nozzle: Remove the battery
and contact your STIHL servicing dealer.
Blower has a malfunction.
10.2 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
11.1 Holding and Controlling the Blower
► Hold and control the blower with one hand on the control
handle - wrap your thumb around the handle.
11.2 Blow-Sweeping
► Point the nozzle at the ground.
► Walk slowly and steadily forwards.
10 Testing the Blower and Battery
11 Operating the Blower
0000-GXX-2147-A0
0000-GXX-0620-A0