Stihl BR 420 - Replacing Starter Rope and Rewind Spring; Starter Rope Replacement and Grip Procedures

24
English / USA
BR 340, BR 340 L, BR 420, BR 420 C
Replacing the starter rope
: Remove the screws (1).
: Take the starter cover (2) off the
engine.
: Remove the spring clip (3).
: Remove the rope rotor with washer
(4) and pawl (5).
: Ease the cap (6) out of the starter
grip.
: Remove remaining rope from the
rotor and grip.
: Tie a simple overhand knot in the
end of the new starter rope (see
Specifications) and then thread the
rope through the top of the grip and
the rope bushing (7).
: Refit the cap in the grip.
Replacing Starter Rope and
Rewind Spring
1
1
1
373BA025 KN
2
1
353BA034 KN
3
5
4
353BA041 KN
7
6