Stihl Brushcutter - Definitions

O
n
l
i
n
e
v
e
r
s
i
o
n
-
n
o
t
f
o
r
r
e
p
r
i
n
t
'HILQLWLRQV
 %LNHKDQGOH
-KDQGOH
To hold the brushcutter with both
hands.
 7KURWWOHWULJJHU
Controls the speed of the engine.
 7KURWWOHWULJJHULQWHUORFN
Must be depressed before the
throttle trigger can be activated.
 +DQGOHVXSSRUW
Connects the drive shaft to the
handle bars.
 &ODPS
The device to connect the brush-
cutter to the harness.
 6WDUWHUJULS
The grip of the pull starter, which is
the device to start the engine.
 6SDUNSOXJERRW
Connects the spark plug to the
ignition wire.
 &DUEXUHWRUDGMXVWLQJVFUHZV
For tuning carburetor.
 )XHOILOOHUFDS
For closing the fuel tank.
 0DFKLQHVXSSRUW
For resting machine on the ground.
 7KURWWOHFDEOHVWRSVZLWFKZLUH
Connect operator’s control grip to
the powerhead.
 7KURWWOHFDEOHUHWDLQHU
Fixes the throttle cable on the drive
shaft.
 6OLGHFRQWURO
Starting throttle lock and stop
switch. Keeps the throttle partially
open during starting and switches
the engine’s ignition off and stops
the engine.
 6WRSVZLWFK
Switches the engine’s ignition
system off and stops the engine.
 +DQGOHKRVH
For holding machine during starting
and cutting work.
