Stihl Brushcutter - Page 36

O
n
l
i
n
e
v
e
r
s
i
o
n
-
n
o
t
f
o
r
r
e
p
r
i
n
t
$WYHU\ORZRXWVLGHWHPSHUDWXUHV
$OORZHQJLQHWRZDUPXS
As soon as engine runs:
•
Warm up engine for about 1 minute
at full throttle.
•
Release throttle trigger -
slide control moves to the
"Run" position  and the engine
returns to idling speed.
•
Turn filter cover to 581.
,IWKHHQJLQHGRHVQ¶WVWDUW
•
If you did not turn the
filter cover to 581 quickly
enough after the engine began
to fire, the combustion chamber
is flooded.
•
Remove spark plug boot .
•
Unscrew and dry off the
spark plug.
•
Set slide control to 6723.
•
Open the throttle fully.
•
Pull the starter rope several times
to clear the combustion chamber.
•
Refit the spark plug and connect
the spark plug boot.
•
Set slide control to 67$57 .
•
Turn filter cover to 581,
even if engine is cold.
•
Now start the engine.
)XHOWDQNUXQXQWLOGU\DQGWKHQ
UHIXHOHG
•
Press transparent fuel pump bulb
 several times - it must be filled
with fuel.
•
Now start the engine.
343BA035
343BA034
